Delmhorst MTX-C/PKG Moisture Transmitter for Current Output

This is ideally suited for applications requiring continuous monitoring of moisture in hygroscopic materials and interfacing the sensor to a data logger or a computer. The transmitter is housed in an ABS wall-mounted case for easy mounting near the sensor, or in a control room. Measures moisture in wood or other hygroscopic materials in conjunction with any Delmhorst electrode to generate a current output. The transmitter does not have a display. It uses a 4-wire transmission method. DC voltage powers the unit by a separate wire from the wire that is used to carry the current output.

Delmhorst MTX-C/PKG Offers

Measures moisture in wood or other hygroscopic materials in conjunction with any Delmhorst electrode to generate a current output. The transmitter does not have a display. It uses a 4-wire transmission method. DC voltage powers the unit by a separate wire from the wire that is used to carry the current output.

Features

• One input
• Minimum supply current of 500mA
• Terminals - 2.5 mm (Center Positive) power jack for Power Input, Terminal Strip, and UHF connector for Moisture Input

• Delmhorst MTX-C/PKG Specifications

  Moisture Range	6% to 60% Wood (Douglas Fir @ 21°C/70°F)
  Operating Temperature Range	0 to 70°C (32 to 158°F) (nominal)
  Number of Outputs	One
  Outputs	DC Current: 4 to 20mA (Non-linear, inversely proportional) Voltage: 1 to 5V DC, or 0 to 2V DC
  Power Requirement	DC Voltage between 15 to 30V
  Supply Current	Minimum 500mA
  Case Size	83 x 83 x 32mm
  Mounting Base	108 x 84mm
  Terminals	2.5mm (Centre Positive) Power Jack for Power Input, Terminal Strip and UHF connector for Moisture Input